juicysfplugin/modules/juce_core/containers/juce_AbstractFifo.h

/*
  ==============================================================================

   This file is part of the JUCE library.
   Copyright (c) 2017 - ROLI Ltd.

   JUCE is an open source library subject to commercial or open-source
   licensing.

   The code included in this file is provided under the terms of the ISC license
   http://www.isc.org/downloads/software-support-policy/isc-license. Permission
   To use, copy, modify, and/or distribute this software for any purpose with or
   without fee is hereby granted provided that the above copyright notice and
   this permission notice appear in all copies.

   JUCE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY, AND ALL WARRANTIES, WHETHER
   EXPRESSED OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR PURPOSE, ARE
   DISCLAIMED.

  ==============================================================================
*/

namespace juce
{

//==============================================================================
/**
    Encapsulates the logic required to implement a lock-free FIFO.

    This class handles the logic needed when building a single-reader, single-writer FIFO.

    It doesn't actually hold any data itself, but your FIFO class can use one of these to manage
    its position and status when reading or writing to it.

    To use it, you can call prepareToWrite() to determine the position within your own buffer that
    an incoming block of data should be stored, and prepareToRead() to find out when the next
    outgoing block should be read from.

    e.g.
    @code
    struct MyFifo
    {
        void addToFifo (const int* someData, int numItems)
        {
            int start1, size1, start2, size2;
            abstractFifo.prepareToWrite (numItems, start1, size1, start2, size2);

            if (size1 > 0)
                copySomeData (myBuffer + start1, someData, size1);

            if (size2 > 0)
                copySomeData (myBuffer + start2, someData + size1, size2);

            abstractFifo.finishedWrite (size1 + size2);
        }

        void readFromFifo (int* someData, int numItems)
        {
            int start1, size1, start2, size2;
            abstractFifo.prepareToRead (numItems, start1, size1, start2, size2);

            if (size1 > 0)
                copySomeData (someData, myBuffer + start1, size1);

            if (size2 > 0)
                copySomeData (someData + size1, myBuffer + start2, size2);

            abstractFifo.finishedRead (size1 + size2);
        }

        AbstractFifo abstractFifo { 1024 };
        int myBuffer[1024];
    };
    @endcode

    @tags{Core}
*/
class JUCE_API  AbstractFifo
{
public:
    //==============================================================================
    /** Creates a FIFO to manage a buffer with the specified capacity. */
    AbstractFifo (int capacity) noexcept;

    /** Destructor */
    ~AbstractFifo();

    //==============================================================================
    /** Returns the total size of the buffer being managed. */
    int getTotalSize() const noexcept;

    /** Returns the number of items that can currently be added to the buffer without it overflowing. */
    int getFreeSpace() const noexcept;

    /** Returns the number of items that can currently be read from the buffer. */
    int getNumReady() const noexcept;

    /** Clears the buffer positions, so that it appears empty. */
    void reset() noexcept;

    /** Changes the buffer's total size.
        Note that this isn't thread-safe, so don't call it if there's any danger that it
        might overlap with a call to any other method in this class!
    */
    void setTotalSize (int newSize) noexcept;

    //==============================================================================
    /** Returns the location within the buffer at which an incoming block of data should be written.

        Because the section of data that you want to add to the buffer may overlap the end
        and wrap around to the start, two blocks within your buffer are returned, and you
        should copy your data into the first one, with any remaining data spilling over into
        the second.

        If the number of items you ask for is too large to fit within the buffer's free space, then
        blockSize1 + blockSize2 may add up to a lower value than numToWrite. If this happens, you
        may decide to keep waiting and re-trying the method until there's enough space available.

        After calling this method, if you choose to write your data into the blocks returned, you
        must call finishedWrite() to tell the FIFO how much data you actually added.

        e.g.
        @code
        void addToFifo (const int* someData, int numItems)
        {
            int start1, size1, start2, size2;
            prepareToWrite (numItems, start1, size1, start2, size2);

            if (size1 > 0)
                copySomeData (myBuffer + start1, someData, size1);

            if (size2 > 0)
                copySomeData (myBuffer + start2, someData + size1, size2);

            finishedWrite (size1 + size2);
        }
        @endcode

        @param numToWrite       indicates how many items you'd like to add to the buffer
        @param startIndex1      on exit, this will contain the start index in your buffer at which your data should be written
        @param blockSize1       on exit, this indicates how many items can be written to the block starting at startIndex1
        @param startIndex2      on exit, this will contain the start index in your buffer at which any data that didn't fit into
                                the first block should be written
        @param blockSize2       on exit, this indicates how many items can be written to the block starting at startIndex2
        @see finishedWrite
    */
    void prepareToWrite (int numToWrite, int& startIndex1, int& blockSize1, int& startIndex2, int& blockSize2) const noexcept;

    /** Called after writing from the FIFO, to indicate that this many items have been added.
        @see prepareToWrite
    */
    void finishedWrite (int numWritten) noexcept;

    /** Returns the location within the buffer from which the next block of data should be read.

        Because the section of data that you want to read from the buffer may overlap the end
        and wrap around to the start, two blocks within your buffer are returned, and you
        should read from both of them.

        If the number of items you ask for is greater than the amount of data available, then
        blockSize1 + blockSize2 may add up to a lower value than numWanted. If this happens, you
        may decide to keep waiting and re-trying the method until there's enough data available.

        After calling this method, if you choose to read the data, you must call finishedRead() to
        tell the FIFO how much data you have consumed.

        e.g.
        @code
        void readFromFifo (int* someData, int numItems)
        {
            int start1, size1, start2, size2;
            prepareToRead (numSamples, start1, size1, start2, size2);

            if (size1 > 0)
                copySomeData (someData, myBuffer + start1, size1);

            if (size2 > 0)
                copySomeData (someData + size1, myBuffer + start2, size2);

            finishedRead (size1 + size2);
        }
        @endcode

        @param numWanted        indicates how many items you'd like to add to the buffer
        @param startIndex1      on exit, this will contain the start index in your buffer at which your data should be written
        @param blockSize1       on exit, this indicates how many items can be written to the block starting at startIndex1
        @param startIndex2      on exit, this will contain the start index in your buffer at which any data that didn't fit into
                                the first block should be written
        @param blockSize2       on exit, this indicates how many items can be written to the block starting at startIndex2
        @see finishedRead
    */
    void prepareToRead (int numWanted, int& startIndex1, int& blockSize1, int& startIndex2, int& blockSize2) const noexcept;

    /** Called after reading from the FIFO, to indicate that this many items have now been consumed.
        @see prepareToRead
    */
    void finishedRead (int numRead) noexcept;

    //==============================================================================

private:
    enum class ReadOrWrite
    {
        read,
        write
    };

public:
    /** Class for a scoped reader/writer */
    template <ReadOrWrite mode>
    class ScopedReadWrite final
    {
    public:
        /** Construct an unassigned reader/writer. Doesn't do anything upon destruction. */
        ScopedReadWrite() = default;

        /** Construct a reader/writer and immediately call prepareRead/prepareWrite
            on the abstractFifo which was passed in.
            This object will hold a pointer back to the fifo, so make sure that
            the fifo outlives this object.
        */
        ScopedReadWrite (AbstractFifo& f, int num) noexcept  : fifo (&f)
        {
            prepare (*fifo, num);
        }

        ScopedReadWrite (const ScopedReadWrite&) = delete;
        ScopedReadWrite (ScopedReadWrite&&) noexcept;

        ScopedReadWrite& operator= (const ScopedReadWrite&) = delete;
        ScopedReadWrite& operator= (ScopedReadWrite&&) noexcept;

        /** Calls finishedRead or finishedWrite if this is a non-null scoped
            reader/writer.
        */
        ~ScopedReadWrite() noexcept
        {
            if (fifo != nullptr)
                finish (*fifo, blockSize1 + blockSize2);
        }

        /** Calls the passed function with each index that was deemed valid
            for the current read/write operation.
        */
        template <typename FunctionToApply>
        void forEach (FunctionToApply&& func) const
        {
            for (auto i = startIndex1, e = startIndex1 + blockSize1; i != e; ++i)  func (i);
            for (auto i = startIndex2, e = startIndex2 + blockSize2; i != e; ++i)  func (i);
        }

        int startIndex1, blockSize1, startIndex2, blockSize2;

    private:
        void prepare (AbstractFifo&, int) noexcept;
        static void finish (AbstractFifo&, int) noexcept;
        void swap (ScopedReadWrite&) noexcept;

        AbstractFifo* fifo = nullptr;
    };

    using ScopedRead  = ScopedReadWrite<ReadOrWrite::read>;
    using ScopedWrite = ScopedReadWrite<ReadOrWrite::write>;

    /** Replaces prepareToRead/finishedRead with a single function.
        This function returns an object which contains the start indices and
        block sizes, and also automatically finishes the read operation when
        it goes out of scope.
        @code
        {
            auto readHandle = fifo.read (4);

            for (auto i = 0; i != readHandle.blockSize1; ++i)
            {
                // read the item at index readHandle.startIndex1 + i
            }

            for (auto i = 0; i != readHandle.blockSize2; ++i)
            {
                // read the item at index readHandle.startIndex2 + i
            }
        } // readHandle goes out of scope here, finishing the read operation
        @endcode
    */
    ScopedRead read (int numToRead) noexcept;

    /** Replaces prepareToWrite/finishedWrite with a single function.
        This function returns an object which contains the start indices and
        block sizes, and also automatically finishes the write operation when
        it goes out of scope.
        @code
        {
            auto writeHandle = fifo.write (5);

            for (auto i = 0; i != writeHandle.blockSize1; ++i)
            {
                // write the item at index writeHandle.startIndex1 + i
            }

            for (auto i = 0; i != writeHandle.blockSize2; ++i)
            {
                // write the item at index writeHandle.startIndex2 + i
            }
        } // writeHandle goes out of scope here, finishing the write operation
        @endcode
    */
    ScopedWrite write (int numToWrite) noexcept;

private:
    //==============================================================================
    int bufferSize;
    Atomic<int> validStart, validEnd;

    JUCE_DECLARE_NON_COPYABLE_WITH_LEAK_DETECTOR (AbstractFifo)
};

template<>
inline void AbstractFifo::ScopedReadWrite<AbstractFifo::ReadOrWrite::read>::finish (AbstractFifo& f, int num) noexcept
{
    f.finishedRead (num);
}

template<>
inline void AbstractFifo::ScopedReadWrite<AbstractFifo::ReadOrWrite::write>::finish (AbstractFifo& f, int num) noexcept
{
    f.finishedWrite (num);
}

template<>
inline void AbstractFifo::ScopedReadWrite<AbstractFifo::ReadOrWrite::read>::prepare (AbstractFifo& f, int num) noexcept
{
    f.prepareToRead (num, startIndex1, blockSize1, startIndex2, blockSize2);
}

template<>
inline void AbstractFifo::ScopedReadWrite<AbstractFifo::ReadOrWrite::write>::prepare (AbstractFifo& f, int num) noexcept
{
    f.prepareToWrite (num, startIndex1, blockSize1, startIndex2, blockSize2);
}


} // namespace juce